Skip to navigation Skip to main content

Adelix. İyi koordine edilmiş ekip çalışması bizden bahseder

+90 539 843 77 25

Adelix Turkiye Company
  • ANA SAYFA
  • Katalog
  • Servis Merkezi
  • İşbirliği
  • Şirket hakkında
  • İLETİŞİM
  • Haberler
Bir soru sor

Danışmanlık İçin Bize Ulaşın!

Sizlere yardım etmek için buradayız. Aşağıdaki bölümden bize ulaşabilirsiniz.

    Kişisel verilerin işlenmesine izin veriyorum ve kullanıcı sözleşmesini ve gizlilik politikasını kabul ediyorum
    Adelix Turkiye Company
    Menü

    Olaylar

    23 May
    Olaylar

    Control Trade Fair’deki Adelix Stand

    Tarafından gönderildi author-avatar admin
    23.05.2023
    Teknik Teşhis Alanında Başarı Yansımaları. Almanya'nın Stuttgart şehrinde her yıl düzenlenen Control Trade Fair, teknik teşhis ve kontr...
    Okumaya devam
    01 Ara
    Olaylar

    Adelixfirması 06 – 08 Ekim 2022 ANKIROS / TURKCAST fuarındayeraldı

    Tarafından gönderildi author-avatar admin
    01.12.2022
    ANKIROS / ANNOFER / TURKCAST, çelik, dökümhane ve demir dışı metal endüstrilerinde profesyoneller, anlaşma yapanlar ve uzmanlar için üs...
    Okumaya devam
    What can vibration tell you about a machine? Vibr What can vibration tell you about a machine? Vibration is more than just a value on the screen. Its frequency spectrum can provide valuable information about the condition of rotating machinery and help identify developing faults at an early stage. Different mechanical problems can produce different vibration patterns: ⚙️ Imbalance — often characterized by a dominant component at 1X rotational frequency. ⚙️ Misalignment — may produce elevated vibration at 1X, 2X and higher harmonics, depending on the type and severity of misalignment. ⚙️ Bearing defects — can generate repetitive impacts and characteristic bearing frequencies such as BPFO, BPFI, BSF and FTF. ⚙️ Mechanical looseness — may produce multiple harmonics, impacts and increased broadband vibration. ⚙️ Gear problems — often appear around gear mesh frequency (GMF), its harmonics and sidebands. This is why vibration diagnostics is not simply about asking “How much does the machine vibrate?” The more important questions are: At what frequencies? What pattern does the spectrum show? How is it changing over time? Correct interpretation of these signals can help detect developing problems before they result in increased wear, secondary damage or unplanned downtime. Measure. Analyze. Diagnose. ADELIX — vibration measurement and machinery diagnostics. #adelixcompany #vibrationanalysis #conditionmonitoring #predictivemaintenance
    ✈️ More than 100,000 commercial flights take off e ✈️ More than 100,000 commercial flights take off every day. Behind every safe flight are thousands of engineering inspections. Every takeoff and landing places cyclic stress on an aircraft’s structure. Over time, materials experience fatigue, and microscopic cracks may develop—far too small to be seen with the naked eye. That is why aviation relies on Non-Destructive Testing (NDT). ✔ Ultrasonic Testing (UT) detects internal defects. ✔ Eddy Current Testing (ECT) identifies tiny surface cracks around rivets and fastener holes. ✔ Liquid Penetrant Testing (PT) reveals microscopic surface flaws. ✔ Radiographic Testing (RT) examines the internal structure of components without damaging them. These inspection methods help engineers detect defects long before they become a safety risk. Every safe flight begins long before takeoff. #ndt #nondestructivetesting #aviationmaintenance #aircraftinspection #aerospace
    When Does A-Scan Become an Essential Tool? Most u When Does A-Scan Become an Essential Tool? Most ultrasonic thickness gauges display only one value — the measured thickness. But is that enough when reliable inspection is critical? Not always. When inspecting corroded components, complex geometries, multilayer materials, or surfaces with non-uniform structures, it is essential for the operator to understand how reliable the measurement actually is. This is exactly where A-Scan becomes invaluable. A-Scan displays the ultrasonic signal in real time, allowing the operator to visualize echoes from material interfaces and monitor the measurement process itself. It helps to: ✔️ Verify that the instrument has identified the correct back-wall echo; ✔️ Detect false or unwanted echo signals; ✔️ Evaluate the quality of acoustic coupling; ✔️ Improve measurement reliability on materials with complex structures; ✔️ Increase confidence in measurement results under challenging inspection conditions. In other words, A-Scan allows the operator not only to see the measured thickness, but also to understand why the instrument produced that result. With the ADL-UT25, the A-Scan mode provides greater confidence during inspection by enabling decisions based on signal analysis rather than relying solely on the displayed thickness value. #ultrasonicthicknessgauge #ultrasonictesting #thicknessmeasurement #ndt #nondestructivetesting
    NFC Inspection Routes: Smarter Inspections, Greate NFC Inspection Routes: Smarter Inspections, Greater Efficiency⚙️🪄 When inspecting a large number of assets, it’s not enough to simply take measurements. Every result must be accurately linked to the correct inspection point. With ADL-M15, this process is simplified through NFC Inspection Routes. Simply tap the instrument against an NFC tag, and ADL-M15 automatically identifies the inspection point, loads the appropriate measurement settings, and associates the collected data with the correct asset. Key Benefits ✔️ Automatic identification of inspection points ✔️ Predefined inspection routes ✔️ Reduced risk of operator errors ✔️ Faster inspection workflows ✔️ Automatic data transfer to analysis software ADL-M15 helps make route-based inspections faster, more reliable, and better organized. #adelixcompany #adlm15 #conditionmonitoring #predictivemaintenance
    When is one hardness tester enough? Hardness test When is one hardness tester enough? Hardness testing rarely involves just one type of component. One day you need to inspect a large shaft, the next a gear tooth, a bearing raceway, a welded joint, or a thin-walled part after heat treatment. Each application has its own requirements, which is why the choice of testing method is just as important as the choice of instrument. ADL-DU110 combines two of the most widely used hardness testing methods in a single platform: 🔹 Leeb — ideal for large components, castings, forgings and heavy industrial structures. 🔹 UCI — designed for gears, bearings, welds, heat-affected zones, thin sections and other localized measurement areas. This combination allows engineers to perform hardness testing across a wide range of applications without switching between multiple instruments. ⚙️ Large components & structures ⚙️ Gears & complex geometry ⚙️ Bearings & precision parts ⚙️ Welded joints ⚙️ Thin-walled components ⚙️ Heat-treated surfaces One device. Two methods. Countless applications. #adelixcompany #hardnesstesting #du110 #uci #leeb
    📊 INDUSTRIAL FACT 90% of rotating equipment failu 📊 INDUSTRIAL FACT 90% of rotating equipment failures show warning signs before breakdown. Equipment is almost always trying to warn us about an upcoming problem. The real question is whether we notice these signals in time. A slight increase in vibration today can turn into costly repairs, production losses, and unplanned downtime tomorrow. That is why more and more companies are moving from reactive maintenance to predictive maintenance and condition monitoring. With the right instruments, specialists can detect abnormalities at an early stage and take action before a minor issue develops into a critical failure. Don’t wait for failure. Monitor. Analyze. Prevent. Adelix develops and supplies advanced instruments for vibration analysis and condition monitoring. #adelixcompany #industrialfacts #vibrationmonitoring #industrialtechnology
    mail icon

    Adelix çözümleri ile işinizi geliştirin

    Adelix çözümleri ile işinizi geliştirin
    İŞBİRLİĞİ

    ADELIX, merkezi Türkiye, Ankara'da bulunan uluslararası bir şirkettir.

    SEKTÖRLER

    Mekanik testler, kimyasal analizler, malzemelerin ve ürünlerin tahribatsız testlerinin yanı sıra ünitelerin teşhisi ve kontrolü için ekipman tasarımı ve üretimi konusunda uzmandır.

    İLETİŞİM

    Mehmet Akif Ersoy Mahallesi 325.
    Sokak No: 3/111, 06210
    Yenimahalle, Ankara 

    +90 539 843 77 25

    ULUSLARARASI

    For international
    cooperation
    and dealers

    WhatsApp  WhatsApp   Telegram  Telegram

    2023. ADELIX MEDIA tarafından tutkuyla yapılmıştır.

    Bütün hakları saklıdır.

    • English
    • ANA SAYFA
    • Katalog
    • Servis Merkezi
    • İşbirliği
    • Şirket hakkında
    • İLETİŞİM
    • Haberler